Architectural Polished Concrete Toppings & Overlays
Not every existing concrete floor is suitable for direct polishing.
Some slabs have excessive repairs, inconsistent aggregate exposure, unsuitable surface conditions or elevation differences that make it difficult to achieve the desired appearance.
For projects requiring a more controlled architectural finish, engineered cementitious toppings can provide an alternative to grinding and polishing the original concrete.
At AK Level & Polish Inc., we provide specialized concrete resurfacing and polishable topping installations for custom homes, retail stores, corporate offices, commercial renovations and architectural flooring projects throughout Toronto, the GTA and Southern Ontario.
These systems allow us to create a new cement-based wearing surface that can be finished according to the selected product and design requirements.
When the existing slab cannot provide the desired result, the solution may be to create a suitable new surface above it.
What Are Polished Concrete Toppings?
A polished concrete topping is a specially engineered cementitious material installed over a properly prepared substrate to create a new finished floor.
Unlike conventional self-leveling underlayments designed to receive tile, vinyl, carpet or other flooring materials, polishable toppings are formulated for use as the exposed wearing surface.
Depending on the system, the material may be installed at different thicknesses, incorporate decorative aggregate or receive a specific polishing treatment.
The result can resemble traditional polished concrete while providing greater control over the new floor’s surface composition and appearance.
Natural Polished Cementitious Finishes
A contemporary concrete appearance suitable for minimalist residential and commercial interiors.
Fine-Aggregate & Salt-and-Pepper Finishes
Polishable toppings engineered to expose smaller decorative aggregates and create a refined architectural surface.
Decorative Aggregate Exposure
Selected systems allow decorative aggregates to be incorporated and exposed through the finishing process. These can produce a more distinctive concrete or terrazzo-inspired appearance.
Custom-Coloured Toppings
Compatible colouring systems may be used to create selected shades, ranging from neutral greys and warm tones to darker architectural finishes.
Satin & High-Gloss Finishes
Where supported by the selected topping system, different levels of surface refinement can be achieved to complement the intended design. Final appearance, aggregate exposure and colour consistency should be established through approved samples or mock-ups.
When Is a New Topping Better Than Polishing Existing Concrete?
A decorative topping may be the preferred solution when:
- The original slab contains extensive previous repairs or trenches.
- Existing concrete has inconsistent colour or aggregate distribution.
- A specific architectural appearance is required.
- The floor needs substantial elevation correction before finishing.
- Previous flooring removal has left widespread surface damage.
- New construction requires a designed polished concrete floor assembly.
The existing substrate must still be evaluated for structural suitability, moisture conditions and proper bonding.
A new topping does not eliminate movement or underlying concrete defects. The system must be detailed to accommodate applicable joints and substrate conditions.
Our Polished Concrete Topping Systems
Our Polished Concrete Topping Systems We work with established material manufacturers, including ARDEX and MAPEI, to select products appropriate for the project. Depending on the application, suitable systems may include specialized materials such as ARDEX PC-T or MAPEI Ultratop polishable topping products. These materials have different installation requirements, thickness limitations and performance characteristics. Product selection is based on the intended use, specified finish, substrate condition and approved flooring assembly. We distinguish between decorative resurfacing materials, polishable wear toppings and conventional self-leveling underlayments. They are not interchangeable.
The Importance of Preparation & Installation
Architectural topping work requires careful planning.
Our approach considers:
- Assessment of the existing concrete and required elevations.
- Mechanical preparation and substrate repairs.
- Moisture evaluation and mitigation where specified.
- Installation of the compatible bonding and primer system.
- Controlled mixing and placement of the topping.
- Appropriate curing and surface preparation.
- Mechanical polishing or approved finishing treatments.
- Protective treatment and final inspection.
We also consider floor loading, movement joints, transitions, construction scheduling and the requirements of the finished space
Why AK Level and Polish Inc.
Why AK Level & Polish?
Architectural concrete toppings require experience in both cementitious leveling and decorative concrete finishing.
Our background in concrete preparation, floor leveling, resurfacing, moisture mitigation and polishing allows us to manage the relationship between the existing substrate and the new finished floor.
We understand that the final result depends on more than selecting an attractive material.
Preparation, elevations, installation conditions, appropriate product selection and finishing techniques all contribute to a successful project.
Planning a high-end polished concrete floor or commercial resurfacing project?
